Beach Sweater is Done!

Yes, yes, at long last, this beautiful sweater full of bright turquoise-y green and deep blue, colors I saw and loved and bought on an impulse, is DONE! And now I can show a picture and blog about it:

Lovely front of lovely Beach Sweater

Two of the details on this simple sweater are right there on the photo - the slight V-neck with the foldover collar (I guess in fashion circles it's called a "Bistro collar") and the slight flaring of the sleeves so that it covers things like bra straps and is not a true tank top. Which is good from my older POV.

The sleeves are easy to expand - you simply Sl1, M1, K2, Sl1 to increase at the start of the sleeve shaping, and the slipping of a stitch (Sl1) from the left-hand needle to the right-hand needle gives it that little bit of raised look. Which is an effective design technique when you are using a combination of yarns or when using a yarn that has a nub or a slight pattern to it, because it is subtle enough to attract the eye but does not overwhelm the yarn you are using. And the M1 increase happens every 4 rows, just as you're getting bored with knitting stockinette stitch.

The collar option is also quite easy - it calls for picking up and knitting as you usually do when doing a collar (after the sleeve seams are sewn, you then create a collar on those two otherwise plain pieces of knitted fabric). But again, the designer has you do the Sl1, M1, K2, Sl1 to create flaps on the front of the sweater while you make a collar that folds over the back of the sweater like a traditional collar does.

Here is the back of the Beach sweater. The roll at the top
center of the back is the collar that rolls down like a
traditional collar.

Another design change I made on this sweater was to increase the length. Partly because of my bust size and partly because I'm not young enough to want to have my belly button showing when I raise my arms up, I increased the length to 16" rather than the recommended 14 1/2". And that extra inch and a half really, really made all the difference. It also meant that I had to spend a whole lotta time with the measuring tape, measuring the back on the floor, then the top on the floor, then the top on top of the back, then the back . . . you get the picture! But the extra effort was worth it and this sweater is quite wearable.

And really, sewing the side seams was not that difficult. Just a basic mattress stitch that you can do in front of an old movie (yes, it can be a Bette Davis murder mystery - there's no counting, just sewing). I'm not one of those knitting purists who has to knit every single sweater in the round, modifying any sweater pattern that says differently. The way I look at it, sewing side seams is the easy, fun portion of the knitting - it lets you see how the sweater looks from all the knitting you've done. On the other hand, I hate knitting in yarn ends. THAT's the part where I pour myself a glass of wine and grumble my way through that onerous task. I don't know why I hate the yarn ends and ease into the side seams of knitting, but there you have it.

As I mentioned in a previous post, I had knit this sweater when I saw some Rasta yarn by Berroco (now discontinued. Of course. They were notorious for that.) in another local yarn shop. I had gone shopping with friends K&A near their hometown knit shop, and we brought the boys into shop with us. The boys got a whole new eye-opening experience, and we girls got to shop. Rasta is considered a heavy cotton, knit on size 10, and what was especially lovely about it was it was not a twisted cotton yarn with nubblies on it: it looked like the kind of cotton strips you use for a woven rug, with the nubbly bits all twisted onto it.

This first sweater I knit fairly quickly, as it required less stitches to cast on and I was lazy and went with the pattern directions. It looks great, and it's the perfect cotton sweater to wear with, say, khaki pants or even light colored jeans. The color of the nubbly bits just jumps out at you, and the background is neutral enough for just staying in the background. It's just a little short for my long-torsoed figure, but the pattern is easy enough to increase prior to the sleeve increases.

Here is the almost-completed sweater (the ends need to be woven in, and the bow on the top RH side of the collar is holding the live stitches).

Bistro shirt made of Rasta cotton yarn

Just so you can get an idea of how the Rasta yarn looked when it was in production, and why I jumped on it when I found it at a yarn shop and bought up all they had of the dye lot, here is a close-up of the yarn and its texture:

Rasta yarn in all its glory, with old-fashioned
plastic needles that made this cotton yarn
really fly, with just enough give for my hands

I really, really enjoyed knitting this sweater the second time through, and have already worn it out to friends' house. I think it will be one that is classy enough I can wear it to work. Both sweaters, really. Not that I'm a fashion plate, but it definitely has classic lines that fit with a "business casual" environment.

Beach Sweater in Asheville

I call it my Beach sweater because its colors are, well, beach-like. Bright blue and green, and it's not often that I can find a shade of green that a) I like and b) does not make me look like I'm sickly and ready to fall over in a dead faint. I found two shades last year when I went to help with the tiny house on Mt. Matt (see "Life in 120 Square Feet" blog next door for additional information about my friends' adventures). Since I'm their friend I get to indulge in their hospitality over July 4th weekend and help with whatever odd jobs are on the docket for that weekend.

Two years ago we were only there for a night and one full day due to work schedules (or maybe it was two full nights, one full and two partial days - all I remember was the incredible amount of RAIN that weekend and how dry our new tent kept us). Last year we drove up after work on Friday and took a road we had taken in years past when going to Hickory for furniture shopping, a road called White Horse Road. We hadn't remembered it being as industrial in 1996 as it was in 2010, but then we got past all the "development" and WOW! There was a sunset between two mountain peaks and we realized we had taken the most beautiful scenic route we could have hoped for.

On the morrow last year we spent some time in downtown Asheville. I had heard about this wonderful shop from customers who had been there (*grumble*) while I had to stay in Atlanta and mind my shop while they went galivanting around the country. The shop is called Earth Guild, and it was supposed to be fantastic and full of great yarn and creativity, so I asked directions while in Asheville to it. We walked uphill and down, saw the marvelous fountain park in the downtown area, and finally went into Earth Guild. Oh my.

Really. Seriously. Oh my.

They had everything there - basketweaving, leatherworking, clay, and knitting. Their colors were inspirational and of course I just had to buy. I had been working for almost a year, after all, and wasn't part of vacationing visiting the yarn and needlework shops??

So I found this blue Ironstone yarn. It was a thick-thin cotton construction that called for a size 6 needle. Size 6? Were they kidding? I would have had to wear a shirt under my knitted sweater, and what's the point in that? So I discovered some green, and twisted the two yarns together. WOW. Just wow.

The texture, on size 6's, getting 5 sts to the inch.
Which is why you always knit a gauge swatch.
Yarn is doubled; mfg. gauge for single ply is 5 sts/inch. Who knew??

Just the perfect combination, and surely I could create something out of them. I selected an amount of yarn that I thought would be suitable for a sweater, and then the owner said the magic words and I knew I was succumbing: "Those yarns have been discontinued." *Sigh*

What that means is "the manufacturer decided/sales weren't enough to/they had a disagreement with the mill" and there is no more of that yarn. It means "you better buy more yarn than you think because I can't get any more in for you." It means "get out your checkbook, and you might as well stay for a spell cuz you're gonna be spending money, girl."

I saw two sides of this when I was a shopowner. The first was the reaction I had, above, the "get out your checkbook, honey" where you know, you just know, you're going to sell that very last skein of discontinued yarn and not have to worry about telling the next person that you can't get any more of THAT yarn for them. Ever.

The second reaction, which almost always ended in bad feelings all around, was the "Well, I really don't need that much yarn, I'll leave with what I want to/intended to leave with" that came back to haunt them a few months later when, guess what? they didn't have enough yarn to finish their project and were just out of luck. I learned early on that it was my responsibility to advise them of a yarn's discontinued status; it was not my job to feel responsible for their inadequate purchase when they came back and were upset at me, my shop, my suppliers, etc., etc. A very good learning experience for this shopowner, that was.

So anyway. I went back to the Ironstone cubicles, grabbed more yarn, and decided that since they had some Brown Sheep Cotton Fleece yarn in colors I had not yet seen at Sheepish, by golly I'd have to buy sufficient quantity to make that 3/4 sleeve summer cardigan that I had always envisioned as a use for Cotton Fleece, the one you wear in an office in the summer in Atlanta because the air conditioning is just too darn high. And again, there was one color they didn't have quite enough of . . . so another, darker color became the trim. But that's another posting for another day.

So with Cotton Fleece and Ironstone Solo in hand (both arms, really), I went to the cash register. Where I was told that I was close to point A on their discount level, and didn't I need some needles with that? Of course I did! I needed to knit a gauge swatch, now didn't I? And being a North Carolina yarn shop, lo and behold they had Twin Birch needles in stock! I had always loved Twin Birch needles - they were a local company, they put other people to work in the community making needles and other knitting accessories, they used mill ends of wood, etc., etc. Their points were very, very sharp, and while they didn't make circular needles, their straights were just smooth, wooden, warm, and one of my all-time favorite products. So I bought needles in the appropriate sizes for both products (I worked with the owner to determine what size to use for this doubled yarn; size 6 was the answer) and again, went proudly back to my growing pile on the counter.

Where I was gladly told that I was almost at the point on their customer discount level that if I bought $X more, I could get a nice Earth Guild bag. Into said pile went two different skeins of sock yarn (including this, shown on the post about sock knitting at The Mountain, and shown here) and I received a nice blue bag in which to place my larger-than-expected purchase. Oh, and Webmaster Bill decided some woodworking tools would be just the thing, so we got an even larger discount for our even larger purchase. *Sigh*

I decided to use a pattern I had used before called the Bistro Shirt by Oat Couture, a fantastic summer sweater with a nice open collar. I had knit a bulky cotton yarn called Rasta into said summer sweater pattern a few years ago, and realized that this yarn with its thick-thin texture and twisted together would be perfect. The pattern is strictly stockinette, so fancier yarns help bring more jazz to it.

(Sorry - forgot to rotate it!)

But, here it is, the day after our annual weekend at Mt. Matt, and said sweater is almost finished. The back I finished before The Mountain venture, and for some reason (maybe after two very complicated socks for the Ravelry Cookies KAL??) I just wanted some easy, mindless, in-front-of-the-TV-to-watch-movies knitting. So the front is done, and all it needs is the 3-needle bind-off to sew together the shoulder seams, and then knit up the side seams. Here are pictures of the finished back and almost finished front:

Back, with yarn instead of metal stitch holders,
to allow the live stitches to "relax" better

Front, with Twin Birch needles quite visible,
and the front RH and LH sides yet to be knit

Oh, and I have tons more yarn left over. Guess I was the other end of the purchasing spectrum, eh? Will post extra yarn on Ravelry - someone is probably looking for it so they can finish their sweater!!

Happy after 4th week!