Lovely front of lovely Beach Sweater
Two of the details on this simple sweater are right there on the photo - the slight V-neck with the foldover collar (I guess in fashion circles it's called a "Bistro collar") and the slight flaring of the sleeves so that it covers things like bra straps and is not a true tank top. Which is good from my older POV.
The sleeves are easy to expand - you simply Sl1, M1, K2, Sl1 to increase at the start of the sleeve shaping, and the slipping of a stitch (Sl1) from the left-hand needle to the right-hand needle gives it that little bit of raised look. Which is an effective design technique when you are using a combination of yarns or when using a yarn that has a nub or a slight pattern to it, because it is subtle enough to attract the eye but does not overwhelm the yarn you are using. And the M1 increase happens every 4 rows, just as you're getting bored with knitting stockinette stitch.
The collar option is also quite easy - it calls for picking up and knitting as you usually do when doing a collar (after the sleeve seams are sewn, you then create a collar on those two otherwise plain pieces of knitted fabric). But again, the designer has you do the Sl1, M1, K2, Sl1 to create flaps on the front of the sweater while you make a collar that folds over the back of the sweater like a traditional collar does.
Two of the details on this simple sweater are right there on the photo - the slight V-neck with the foldover collar (I guess in fashion circles it's called a "Bistro collar") and the slight flaring of the sleeves so that it covers things like bra straps and is not a true tank top. Which is good from my older POV.
The sleeves are easy to expand - you simply Sl1, M1, K2, Sl1 to increase at the start of the sleeve shaping, and the slipping of a stitch (Sl1) from the left-hand needle to the right-hand needle gives it that little bit of raised look. Which is an effective design technique when you are using a combination of yarns or when using a yarn that has a nub or a slight pattern to it, because it is subtle enough to attract the eye but does not overwhelm the yarn you are using. And the M1 increase happens every 4 rows, just as you're getting bored with knitting stockinette stitch.
The collar option is also quite easy - it calls for picking up and knitting as you usually do when doing a collar (after the sleeve seams are sewn, you then create a collar on those two otherwise plain pieces of knitted fabric). But again, the designer has you do the Sl1, M1, K2, Sl1 to create flaps on the front of the sweater while you make a collar that folds over the back of the sweater like a traditional collar does.
Here is the back of the Beach sweater. The roll at the top
center of the back is the collar that rolls down like a
traditional collar.
Another design change I made on this sweater was to increase the length. Partly because of my bust size and partly because I'm not young enough to want to have my belly button showing when I raise my arms up, I increased the length to 16" rather than the recommended 14 1/2". And that extra inch and a half really, really made all the difference. It also meant that I had to spend a whole lotta time with the measuring tape, measuring the back on the floor, then the top on the floor, then the top on top of the back, then the back . . . you get the picture! But the extra effort was worth it and this sweater is quite wearable.
And really, sewing the side seams was not that difficult. Just a basic mattress stitch that you can do in front of an old movie (yes, it can be a Bette Davis murder mystery - there's no counting, just sewing). I'm not one of those knitting purists who has to knit every single sweater in the round, modifying any sweater pattern that says differently. The way I look at it, sewing side seams is the easy, fun portion of the knitting - it lets you see how the sweater looks from all the knitting you've done. On the other hand, I hate knitting in yarn ends. THAT's the part where I pour myself a glass of wine and grumble my way through that onerous task. I don't know why I hate the yarn ends and ease into the side seams of knitting, but there you have it.
As I mentioned in a previous post, I had knit this sweater when I saw some Rasta yarn by Berroco (now discontinued. Of course. They were notorious for that.) in another local yarn shop. I had gone shopping with friends K&A near their hometown knit shop, and we brought the boys into shop with us. The boys got a whole new eye-opening experience, and we girls got to shop. Rasta is considered a heavy cotton, knit on size 10, and what was especially lovely about it was it was not a twisted cotton yarn with nubblies on it: it looked like the kind of cotton strips you use for a woven rug, with the nubbly bits all twisted onto it.
This first sweater I knit fairly quickly, as it required less stitches to cast on and I was lazy and went with the pattern directions. It looks great, and it's the perfect cotton sweater to wear with, say, khaki pants or even light colored jeans. The color of the nubbly bits just jumps out at you, and the background is neutral enough for just staying in the background. It's just a little short for my long-torsoed figure, but the pattern is easy enough to increase prior to the sleeve increases.
Here is the almost-completed sweater (the ends need to be woven in, and the bow on the top RH side of the collar is holding the live stitches).
center of the back is the collar that rolls down like a
traditional collar.
Another design change I made on this sweater was to increase the length. Partly because of my bust size and partly because I'm not young enough to want to have my belly button showing when I raise my arms up, I increased the length to 16" rather than the recommended 14 1/2". And that extra inch and a half really, really made all the difference. It also meant that I had to spend a whole lotta time with the measuring tape, measuring the back on the floor, then the top on the floor, then the top on top of the back, then the back . . . you get the picture! But the extra effort was worth it and this sweater is quite wearable.
And really, sewing the side seams was not that difficult. Just a basic mattress stitch that you can do in front of an old movie (yes, it can be a Bette Davis murder mystery - there's no counting, just sewing). I'm not one of those knitting purists who has to knit every single sweater in the round, modifying any sweater pattern that says differently. The way I look at it, sewing side seams is the easy, fun portion of the knitting - it lets you see how the sweater looks from all the knitting you've done. On the other hand, I hate knitting in yarn ends. THAT's the part where I pour myself a glass of wine and grumble my way through that onerous task. I don't know why I hate the yarn ends and ease into the side seams of knitting, but there you have it.
As I mentioned in a previous post, I had knit this sweater when I saw some Rasta yarn by Berroco (now discontinued. Of course. They were notorious for that.) in another local yarn shop. I had gone shopping with friends K&A near their hometown knit shop, and we brought the boys into shop with us. The boys got a whole new eye-opening experience, and we girls got to shop. Rasta is considered a heavy cotton, knit on size 10, and what was especially lovely about it was it was not a twisted cotton yarn with nubblies on it: it looked like the kind of cotton strips you use for a woven rug, with the nubbly bits all twisted onto it.
This first sweater I knit fairly quickly, as it required less stitches to cast on and I was lazy and went with the pattern directions. It looks great, and it's the perfect cotton sweater to wear with, say, khaki pants or even light colored jeans. The color of the nubbly bits just jumps out at you, and the background is neutral enough for just staying in the background. It's just a little short for my long-torsoed figure, but the pattern is easy enough to increase prior to the sleeve increases.
Here is the almost-completed sweater (the ends need to be woven in, and the bow on the top RH side of the collar is holding the live stitches).
Bistro shirt made of Rasta cotton yarn
Just so you can get an idea of how the Rasta yarn looked when it was in production, and why I jumped on it when I found it at a yarn shop and bought up all they had of the dye lot, here is a close-up of the yarn and its texture:
Rasta yarn in all its glory, with old-fashioned
plastic needles that made this cotton yarn
really fly, with just enough give for my hands
plastic needles that made this cotton yarn
really fly, with just enough give for my hands
I really, really enjoyed knitting this sweater the second time through, and have already worn it out to friends' house. I think it will be one that is classy enough I can wear it to work. Both sweaters, really. Not that I'm a fashion plate, but it definitely has classic lines that fit with a "business casual" environment.
1 comment:
Ah. Beach sweater. I guess we will just have to go down to the beach at Tybee Island then.
Post a Comment